|
Tampa, Florida (March 3, 2023) – Modelithics is pleased to announce the release
of version 23.0 of the Modelithics COMPLETE+3D Library for use with Ansys HFSS.
This library includes Modelithics extensive collection of nearly 400 highly scalable
Microwave Global Models™ for capacitor, inductor, and resistor families from many
popular vendors. Also included is Modelithics' collection of over 500 3D electromagnetic
(EM) geometry models for inductors, capacitors, filters, packages, and connectors.
With both circuit and 3D EM models, the Modelithics COMPLETE+3D Library together
represent over 26,000 individual components.
Version 23.0 adds new substrate-scalable Microwave Global Models for five ultra-broadband
capacitors from KYOCERA-AVX: 550W103 (10 nF), 550Z104 (100 nF), 550Z224 (220 nF),
560Z104 (100 nF), and 560Z224 (220 nF). The models for the 550W103, 550Z104, and
550Z224 capacitors are validated to 110 GHz, while the models for the 560Z104 and
560Z224 capacitors are validated to 67 GHz. Also included in version 23.0 are new
3D Brick Models™ for the same five capacitors. These 3D models are intended for
full wave 3D electromagnetic (EM) simulations that enable designers to account for
component interactions.
Through the Sponsoring Modelithics Vendor Partner (MVP) Program, FREE 90-day
use of Modelithics models for KYOCERA-AVX components are available. For more information
or to request a free use of the new models from KYOCERA-AVX as well as other available
Modelithics models, please visit www.Modelithics.com/MVP.
The new Modelithics circuit and 3D Brick EM models are available within the Modelithics
COMPLETE+3D Library v23.0 for Ansys HFSS. For more information about this new release
and further details on the new models available, please review the v23.0 release
notes. To request a free trial, please visit the Modelithics website at
www.modelithics.com/mvp/HFSS.
About Modelithics, Inc.
Modelithics, Inc. (www.Modelithics.com)
was formed in 2001 to address the industry-wide need for high-accuracy RF and microwave
active and passive simulation models for use in Electronic Design Automation (EDA).
Modelithics' premium product is the Modelithics® COMPLETE Library, which includes
the CLR Library™, containing measurement-based Microwave Global Models™ for a multitude
of commercially-available passive component families, as well non-linear diode models,
non-linear transistor models, and system level component models. Modelithics' services
also address a wide range of custom RF and microwave measurement and modeling needs.
Modelithics product offerings also include the Modelithics mmWave & 5G Library,
Modelithics System Components Library™ the Modelithics COMPLETE+3D Library. Modelithics®
is a registered trademark of Modelithics, Inc. Microwave Global Models™, System
Components Library™ and CLR Library™ are also trademarks of Modelithics, Inc. The
Modelithics Vendor Partner (MVP) Program allows for collaboration and open communication
during the development of advanced data sets and models for commercially available
microwave components and devices, with flexible sponsorship and distribution arrangements
for the resulting data and models. An example of such an arrangement is the Modelithics
Qorvo GaN Library, a fully sponsored library distributed for free by Modelithics
under sponsorship of Qorvo®. Modelithics also offers a Standard & Custom Test
Fixture and Accessory Product Line, including legacy parts from J Micro Technology
for a family of thin film Alumina substrate components.
Contact:
Angie Rogers
Vice President, Marketing & Sales
Modelithics, Inc.
3802 Spectrum Boulevard, Suite 130
Tampa, Florida 33612
Phone: 813.866.6335
E-Mail:
sales@modelithics.com
Web:
modelithics.com
Posted March 6, 2023
|
