905-738-7973 | Toronto, Ontario, Canada
PCB-mounted application-specific RF/EMI
shielding enclosures including true multi-cavity solutions.
720-496-4002 | Boulder, CO
Specialists in intellectual properties strategies,
product development, safety marks, and onsite electromagnetic measurements.
Advanced Compliance Solutions
770-831-8048 | Buford, GA
Provides complete EMC, product safety and environmental
testing of your products.
858-222-1199 | San Diego, CA
RF/microwave multilayer capacitors, high power high
current multilayer, high temperature high voltage multilayer, GBBL high K substrates
for single layer capacitors, ultra low fire dielectric powder. Sizes range from 0201
- 13560, with operating voltages from 25 - 20k volts.
| 818-998-0223 | Chatsworth, CA
Manufacturer of individual calibrated EMC antenna
kits, log periodics, biconical, dipoles, loops, monopoles, horns, preamplifiers, current
probes and low-Loss cables that satisfy many compliance testing standards.
Applied Physical Electronics
512-264-1804 | Austin, TX
Marx generators having output pulses
with ultrafast rise times, moderate pulse widths, and amplitudes ranging from tens of
kV to several MV. RS-105 MIL-STD-461 E/F tester for EMI/EMC. Testing antennas.
AR RF/Microwave Instrumentation
(formerly Amplifier Research)
215-723-8181 | Souderton, PA
RF power amplifiers,
solid state microwave amplifiers, TWT amplifiers, antennas, transient generators, EMC
test systems and software, field probes and monitors, test accessories, and RF test system
| +64 21 208 4303 | New Zealand
Australia and New Zealand C-Tick agent, NZ radiocommunications
agent and NZ medical device sponsor that enables suppliers to meet the electromagnetic
compatibility (EMC) regulatory regimes of both Australia and New Zealand.
+(613) 9763 3079 | Knoxfield Australia
A single source for all
of your EMC requirements including EMC compliance testing, EMR surveys, consultancy,
EMC equipment sales, EMC test system integration, RF shielded enclosures, and antennas.
| 714-587-9800 | Brea, CA
Manufactures wide variety of EMI | EMC test equipment used
for compliance testing, precompliance testing or solving EMC problems. Turnkey systems
available. Active horn antennas, comb generators, field probes, spectrum analyzers, more.
Corcom (now Tyco)
Power line filters, power entry modules,
signal line, facility, DC rated filters.
| 888-725-5361 | Dallas/ TX
EMI/RFI shielding solutions using plating, vacuum metallization
and conductive paint. Dispensed conductive gaskets. 3D metal patterns on plastic including
East Coast Shielding
908-227-6857 | Hackettstown, NJ
EMI shielding products. Serving the electronics
and commercial industries with high quality gaskets, gasket materials, and die-cutting
materials. Whether you need a die cut, molded, or extruded material, we have the knowledge,
expertise, and materials to meet your every need.
EMC Technology Florida
800-544-5594 | Stuart, FL
Thin and thick film passive devices,
attenuators, resistors, terminations, equalizers.
EMC Test Design
| 508-292-1833 | Newton, MA
Offers the complete line of Smart Fieldmeter®
models including three broadband electromagnetic field probes, covering the frequency
range 100 KHz-18 GHz, and one selective GSM probe for GSM 900-1900 MHz range.
Empower RF Systems
| www.310-412-8100 | Inglewood, CA
Founded in 1999, Empower RF Systems is a U.S.-based
company and global leader in power amplifier solutions that are critical to defense,
commercial, and industrial market applications. Investments in both hardware and software
engineering are yielding next generation products with significant size, weight, and
interface functionality advantages over legacy products in the market.
Global Advantage International
(now TÜV SÜD Canada Inc.)
905-883-3919 | Toronto, Ontario, Canada
Product EMC &
safety testing, complete product safety, regulatory compliance and EMC solution provider.
Harwin | 603-893-5376
| Salem, NH
Connectors, IC sockets, PCB sockets, components & PCB accessories,
Instruments for Industry (IFI)
631-467-8400 | Ronkonkoma, NY
Amplifier configurations such as tetrode tubes,
TWTs, klystrons, and solid state devices. Standard horn antennas and TEM cells.
Kete Microwave Electronics
+86-595-22597735 | China
Ferrite RF isolator & circulators, high power RF
resistors & terminations, fixed & variable/step attenuators, multilayer High-Q
chip ceramic& feedthrough capacitor (EMI filters), directional couplers, power dividers
/ combiners, 3dB hybrid couplers.
| 703-450-4401 | Sterling, VA
RF shielded server rack enclosure, waveguides, EMI/RFI
shielding, goof plugs, manufacturing and design services.
+44 149 183 1682 | South Oxfordshire, UK
Radio frequency heating and drying consultancy
service. Radio Frequency Interference (RFI) advice and solutions: assistance with EN55011
(Europe), AS2064 (Australia) and FCC Title 47 Part 18 (USA) compliance and measurement.
Practical shielding and filtering solutions for RFI reduction for existing machines and
new designs Health and Safety Advice and Solutions including OSHA CFR 1910-97 (USA) Physical
Agents Directive requirements for Non Ionising Radiation (Europe) Safe Interlocking,
design of protective systems. RF Awareness. Triode tube (Valve) calculations and replacement
advice. Expert witness service.
| 866-928 8181 | St. Louis, MO
Designer and manufacturer of antenna, electromagnetic
interference [EMI], telematics and thermal management solutions for the telecommunications,
data-communications, computer, general electronics, network equipment, aerospace, defense,
automotive and medical equipment industries.
LBA Group |
252-757-0279 | Greenville, NC
RF & wireless telecommunications industry products &
services including antennas, capacitors, inductors, shielding systems, test equipment,
testing and technical services; RF Awareness & Antenna Co-Location Training.
| 800-527-4362 | Norristown, PA
Specializes in the design, development and manufacturing
of custom and standard EMI filters (RFI filters, EMC filters), EMC solutions, Motor controls,
Electronic controls, Subsystem enclosures and back planes.
| 813-855-6921 | Tampa, FL
Manufactures electronic shielding products including gasketing
that help prevent electromagnetic or radio frequency interference (EMI/RFI) on circuit
Mag Layers USA
| 800-427-4010 | Santa Ana, CA
LTCC components for RF | Bluetooth | WiFi | Zigbee
applications including: chip antennas, baluns, diplexers, band pass filters, filters,
inductors, chokes, coils, & ferrite beads. ISO 140001 certified, complete support
for design through production. Free Samples - just call!
613 737 9680 | Ottawa, Ontario, Canada
TCB and CCB offering wireless certification
and also a test laboratory covering wireless, EMI, safety, laser safety and telecom.
We offer one-stop-shop solutions for worldwide compliance to standards such as FCC, RSS,
CE Marking, UL, CSA, Korea, and Taiwan. We also have experienced design engineers who
can help with product design and compliance strategies.
Orbel | 610-829-5000
| Easton, PA
EMI/RFI shielding, board level RF shielding, multi-cavity shields, finger
stock, chemical etched metal parts, metal stamping and electroplating services.
P & P Technology Ltd
| +44 (0) 1376 550525 | UK
Manufacturer of EMI | RFI shielding gaskets, meshes and
Pepro | 1-814-676-5688
| Oil City, PA
A faraday cage protection system offering protection from lightning
strikes, Electromagnetic Pulse (EMP), Electromagnetic Interference (EMI), and Radio Frequency
Interference (RFI), lessens effects of Passive Inter-Modulation (PIM) when equipment
is installed/maintained properly. Mobile radio sites designed for emergency temporary &
portable mobile communicationsident command posts, remote base stations, Cell on Wheels
(COWS), Site on Wheels (SOWS), Tower on Wheels (TOWS), Mobile Tower Units (MTU), Cell
site On Wheels (cellular emergency services) and other unique applications.
| +44 121 380 0100 | UK
EMI/RFI shielding solutions, from design to compliance. Precision
manufacturing technologies from Ion beam and electroforming to photo etch and laser cutting.
| 631-231-6400 | Bayshore, NY
EMI/EMC/RFI filters, high voltage magnetics & capacitors.
| +61 3 8739 6700 | Australia
Designs, fabricates, installs and tests all types of
Radio Frequency shielded enclosures; offers sales and service for a complete range of
highly specialized EMI/EMC instruments, antennas and accessories; offers a wide range
of testing capabilities and can handle items ranging from mobile phones to large military
RFTek | 919-622-4088
| Raleigh, NC
Consulting and contracting services for Electromagnetic Compatibility
(EMC), Electrostatic Discharge (ESD): design, test and compliance.
| 631-727-1441 | Manorville, NY
Specializes in the manufacture of EMI shielding, waveguide,
connector, conductive, non-conductive, washer style, co-elastomer gaskets, fluid sealing
products, static and reciprocating seals, and O-rings. Capabilities include die cutting,
molding, laser cutting, extruding, and water jet cut gaskets, along with a wide variety
of stocked sheet and roll goods.
01376 330033 | Braintree Essex UK
Design, manufacture &
application of components and materials for the control of electromagnetic interference
EMI and environmental sealing.
Stork Garwood Laboratories
(now Element Materials Technology)
888-427-4111 | Pico Rivera, CA
labs for EMI, EMC, reliability, vibration and environmental testing, FCC approval and
CE certification testing, CE and CCC marking.
Wurth Electronics Midcom
605-886-4385 | Watertown, SD
+49 79 42 945 - 0 | Waldenburg, Germany
power magnetics, EMC components, common mode chokes, capacitors, transformers, RF inductors,
printed circuits boards, terminal blocks, automotive magnetic components, electronic
displays, LEDs, control units, and keypads. Surface mount and through-hole packages available.
Free samples of catalog items are available on request.
York EMC Services
+44 (0) 1904 434440 | UK
EMC test equipment, consultancy and research, CPD &
training, EMC & LVD testing.