Father of Radar Gets His Reward from Patent Office
December 1957 Popular Electronics

December 1957 Popular Electronics

RF Cafe - December 1957 Popular Electronics CoverTable of Contents

Wax nostalgic about and learn from the history of early electronics. See articles from Popular Electronics, published October 1954 - April 1985. All copyrights are hereby acknowledged.

Well, this might get some dander up amongst the believers that Sir Robert Watson-Watt is "the Father of Radar." In the December 1957 edition of Popular Electronics, Col. William R. Blair was given that honored designation based on his work on a pulse-echo method of direction finding in the 1920s. The Wikipedia entry for Col. Blair refers to him more specifically as the "Father of Army Radar." Watson-Watt

William R. Blair was awarded U.S. patent #2,803,819, titled "Object Locating System," on August 20, 1957 - a full 13 years after the patent application was submitted.

Father of Radar Gets His Reward from Patent Office

Col. William R. Blair - RF Cafe

The U. S. Government finally recognized the daddy of radar by granting a patent to Col. William R. Blair (Ret.), above, right, who conceived the pulse-echo method of direction finding prior to 1930. It was developed during the 1930's at, the Signal Corps Laboratories in Fort Monmouth, N. J. In 1937 a prototype, SCR-268, radar system (below) was demonstrated for the Secretary of War and Members of Congress. Plans for this set were turned over to manufacturing companies so that they could build radar equipment for the U. S. Army.

Due to the high degree of secrecy surrounding the development of radar, a patent application was not filed by the Army Signal Corps until 1945, and since then the Patent Office has had the matter under consideration. This radar patent is considered to be as important to the military as the first U. S. patent issued on the telephone was to commercial communication.

SCR-268  Radar System - RF Cafe

SCR-268  Radar System


Scope "Shadow-Screen"

Scope "Shadow-Screen" - RF Cafe

The oscilloscope Shadow-Screen manufactured by Van-Dee Products, Laguna Beach, Calif., is said to end the need for subdued light or an oscilloscope hood. It consists of hundreds of small, hexagonal openings that serve as individual shadow boxes, shutting off glare. The shape of the openings permits observation from any point within 45° of face-on position. Note contrast in photo above.


Open Sesame

Genie Lift-A-Dor - RF Cafe

Genie Lift-A-Dor (not the luscious lady below, but what she's holding) is a new R/C system for opening garage doors from your car. If you should ever want to put the car away with her around, you'll find that a simple touch of the button she's holding will unlock the door, open it and turn on the garage lights. Another push will close and lock the door, and turn out the lights. Made by Alliance Manufacturing Co., Inc., Alliance, Ohio, the device works on a limited-range low frequency which prevents false activation by stray signals.

 

 

Posted July 11, 2011