Custom Dials for Your Equipment
March 1960 Electronics World

March1960 Electronics World

March 1960 Electronics World Cover - RF Cafe  Table of Contents

Wax nostalgic about and learn from the history of early electronics. See articles from Electronics World, published May 1959 - December 1971. All copyrights hereby acknowledged.

Some day in the not too distant future, a generation of electronics enthusiasts will read magazines like Nuts & Volts, QST, Make, and other hobbyist publications and be amazed at how crude our present day methods for building homebrew projects were. They might even feel sorry for us. Having digital cameras, sophisticated graphics software, high resolution inkjet and laser printers, and vinyl cutting machines for adorning chassis and panels are a godsend here in twenty-teens compared to the film-based analog cameras, chemical-based photo processing labs, and rub-on lettering and shape stencils of the nineteen-sixties (±a couple decades), as shown in this article. I feel sorry for those guys back then... and I was one of them.

Custom Dials for Your Equipment

Black dials are obtained by placing the negative over unexposed film - RF Cafe

Black dials are obtained by placing the negative over unexposed film and exposing. Black and white are reversed in new negative.

By Gene Brizendine

Details on the use of a photographic method of making professional-looking dials for home-built equipment.

Practically everyone has had the experience of finishing an excellent piece of electronic equipment only to find that his hand-lettered dial lacked that much-needed "professional" touch.

Since a surprising percentage of electronics enthusiasts are also "shutterbugs," the solution to be described is a "natural." In photography, the process is called "copying" and when it is combined with a few tricks of the lithographer's trade, professional-looking dials are easily produced.

Equipment Required

Almost any camera capable of accurate close-up focusing is suitable and one with ground-glass focusing is ideal. Two photoflood bulbs are desirable but less light will suffice, with a longer exposure being required. The slower films will produce best results. An exposure meter is useful but not mandatory if you're willing to risk a few negatives in trial exposures. An enlarger is also required, however, this portion of the job may be done inexpensively by your neighborhood photo finisher or else a photographer-friend.

Simply stated, we make an oversized "mock-up" of all the characters to appear on the dial, then reduce it photographically to the final size needed to fit the equipment.

First, accurately calibrate your finished electronic equipment, using a sheet of paper temporarily taped to the dial. After all points are marked with a sharp pencil, remove the sheet and re-tape it on a larger, clean sheet of white paper. Tape both to a flat board.

The purpose now is to transfer the temporary calibration information accurately to the larger "mock-up" which is easier to handle and photograph.

With an ink compass and India ink, draw a half-circle for each range called for by the electronic unit. The exact center of the pointer shaft on the temporary markings is used as the center for the larger "mock-up" scales. The temporary calibration points are now transferred to the "mock-up," using a straight-edge and more India ink. Fig. 1.

Rough penciled markings are projected to the larger mock-up as shown - RF Cafe

Fig. 1 - The rough penciled markings are projected to the larger mock-up as shown.

Mock-up is taped to plywood board shown ready for the camera - RF Cafe

Mock-up is taped to plywood board shown ready for the camera.

Now for the lithographer's techniques. For all figures and the lettering, purchase from your stationer sheets of "Artype." These are very accurate black letters, printed on thin transparent plastic sheets, with pressure-sensitive adhesive backing. Included below each character is a thin guide line which is useful in obtaining accurate alignment on the "mock-up." The guide line is removed with a razor blade after final positioning. "Artype" comes in many styles, the figures illustrated being No. 1126, which is about the optimum size for most purposes.

In use, individual characters are transferred to the "mock-up," using any pointed instrument, such as one point of the drafting compass or even milady's hat pin. With just a bit of practice, the knack is quickly acquired of separating the desired character by means of the sharp point. Next "spear" it, move into position on the "mock-up," and smooth down with a fingertip. Continue until the figures and any lettering have the desired arrangement. Conveniently, the "Artype" may be lifted and re-positioned, to correct any mistakes.

The completed "mock-up" is placed in position for photographing, after masking the surplus white border with any dark material. This will prevent stray reflected light from reaching the negative and help produce sharper characters. The camera distance should be close, filling the negative as completely as possible. A tripod, or other steady support, is required. Lights should now be positioned for most uniform lighting of the subject - while, at the same time, avoiding reflections. The best position is about 45 degrees from the plane of the subject, the lights and subject forming a right triangle. The negative should parallel the subject in order to produce over-all "in-focus" results. Stopping down sharply will help here. (See Fig. 2.)

Photographing oversized mock-up - RF Cafe

Fig. 2 - Photographing oversized mock-up.

After a sharp, "contrasty" negative is obtained, it is easy to enlarge to any size required by the equipment. By making the negative "contrasty," the final print should come out a crisp black-and-white.

Making dials this way is much simpler than this rather elaborate description might indicate. Irrespective of whether your newest electronic creation must "pass muster" with the boss or the spouse, a snappy dial can go a long way in gaining approval.

 

 

Posted June 18, 2018