Component Reliability for Electronic Systems
RF Cafe Quiz #25

RF Engineering Quizzes - RF CafeAll RF Cafe Quizzes make great fodder for employment interviews for technicians or engineers - particularly those who are fresh out of school or are relatively new to the work world. Come to think of it, they would make equally excellent study material for the same persons who are going to be interviewed for a job. Bonne chance, Viel Glück, がんばろう, buena suerte, удачи, in bocca al lupo, 행운을 빕니다, ádh mór, בהצלחה, lykke til, 祝你好運. Well, you know what I mean: Good luck!

Click here for the complete list of RF Cafe Quizzes.

Note: Some material based on books have quoted passages.

RF Cafe Featured Book - Component Reliability for Electronic SystemsThis quiz is based on the information presented in Component Reliability for Electronic Systems, by by Bajenescu and Bazu , published by Artech House.

 Note: Some of these books are available as prizes in the monthly RF Cafe Giveaway.

1.  What is the mathematical technique for determining how often different values of a given characteristic of a device are expected to occur?

a)  Integration of variables

b)  Probability distribution

c)  Likelihood of occurrence analysis

d)  Guesswork

RF Cafe Quiz #25 - Lifetime Failure Curve2.  What is the name given to the lifetime failure curve

      shown to the right?

a)  Bathtub curve

b)  Curved-flat-curved graph

c)  Sideways "C" chart

d)  Hockey stick curve

3.  What is the largest contributor to contamination during semiconductor manufacture?

a)  Contamination

b)  Equipment

c)  Operator

d)  Packaging

4.  Which type of semiconductor type has the lowest tolerance to radiation fields?

a)  Isoplanar ECL

b)  CMOS

c)  TTL

d)  BJT

5.  What is/are the most common cause of product failure?

a)  Design deficiencies

b)  Process errors

c)  Process variations

d)  All the above

6.  Which of the three lifetime failure curve (see Q2) regions is where an electromigration failure is most likely to occur?

a)  Wear-out

b)  Useful operating period

c)  Infant mortality

d)  Does not apply

7.  What process is used to apply an electrical stress to components prior to shipping?

a)  Burn-in

b)  Burn-out

c)  Burn-up

d)  Burn-down

8.  Which type of test checks for susceptibility to moisture on a IC die's surface?

a)  Submersion test

b)  Wetness tolerance

c)  Damp heat test

d)  Water torture

9.  What is a major advantage of the thick film hybrid process over a thin film process?

a)  More dimensionally stable

b)  Higher circuit density

c)  Higher component tolerances

d)  Easy to cross conductor lines

10.  What is a type of failure present in MEMS components not commonly found in standard ICs?

a)  Thermal runaway

b)  Surface abrasion

c)  Lead impedance shifting

d)  Substrate expansion

 

Need some help? Click here for the answers and explanations.