 Content is copyright of company represented,
but page format is my copyright - do not distributed.
Press Release Archives:
Here are 2017 press release archive pages
1 |
2 |
3 |
4 |
5
 Expanding the popular and proprietary Linx WRT
line, the
dual-band WiFi WRT antenna supports legacy 2.4 GHz WiFi and
newer 5.8 GHz band applications, in a single, compact antenna. The dual-band WiFi
WRT antenna has a low profile and tamper resistant design that is perfect for challenging
applications such wireless vending, security, traffic, and power equipment. Installing
through a small hole in the enclosure the dual-band WiFi WRT antenna has an integrated
closed-cell PSA seal, protecting critical equipment from harsh, external elements. The
dipole ...
 Triad has released the
TTRM1190, a wideband GaN BDA that operates from 30 MHz to 2700 MHz
and produces over 8 W of TX power. One of the smallest BDAs in the industry measuring
only 3.25 x 2.12 x 0.53 inches, this feature rich BDA is also one of the most efficient.
While producing 8 W of RF power, it only consumes 24 W of DC power. It also
produces over 2 W of linear 16 QAM with < 9% EVM. In order to operate on
various existing platforms, the unit features a wide DC input range of +11 to +28 VDC.
Switching between TX and RX at less than 1 μsec can be performed manually ...
 Saelig Company has announced the
TekBox TBST120/60/60/2
Shielded Tent which provides an economical RF/EMI-attenuated environment for a variety
of bench-top "EMI quiet" applications. The TBST-120/60/60/2 is a compact shielded tent,
designed to suppress interference from ambient noise during EMC pre-compliance measurements.
With outer dimension of 4' x 2' x 2' it can accommodate pre-compliance test equipment
such as LISNs or TEM ...
 Mini-Circuits
announces the availability of four new devices in its lineup of RF and microwave components.
Included are a precision SMA connector gauge kit, a 2.4 mm (female to female) adapter
covering DC to 50 GHz for industry-leading value, a miniature lumped element lowpass
filter that passes DC to 83 MHz with sharp rejection , and a tiny LTCC lowpass filter
that passes DC to 8440 MHz ...
 Triad RF shipped our latest Dual BDA,
the L-band
TTRM1081D. This unit is compatible with all military and commercial
radios and provides over 20 W of linear RF power across 1.3 to 1.4 GHz. Made
specifically for multi-in-multi-out (MIMO) radios, providing 2 radio ports and 2 antenna
ports, each providing 5 W of 64 QAM power and over 20 W peak power. The BDA
operates off a single +28 V supply and provides 25 dB of TX gain and 11 dB
of RX gain in both channels. This class AB LDMOS module is designed for both military
and commercial applications ...
 Please save the date and join Keysight as the
proud host sponsor at
DesignCon 2018.
Keysight's technical experts and application engineers will demonstrate the most advanced
design and test solutions, developed to solve today's most difficult high-speed digital
measurement challenges. What: Keysight at DesignCon 2018, Where: Santa Clara,
CA Convention Center, When: January 31st - February 1st, 2018 ...
 ConductRF is continually innovating and developing
new and improved solutions for RF Interconnect needs. See the latest
TESTeCON RF Test
Cables for labs. ConductRF makes production and test coax cable assemblies as well
as standard & precision RF connectors. Over 1,000 solutions for low PIM in-building
to choose from in the iBwave component library. They also provide custom coax solutions
for applications where some standard just won't do. Please visit
ConductRF
today to see how they can help your project!
 Mr. Oleg Sakharov, Director of the Center of Telecom.
Technologies, LLC, recently sent me information on the
MLinkPlanner software for performing microwave communications link design. Judging
only from the provided screenshots and the online documentation, MLinkPlanner looks to
be very user friendly and loaded with features. I downloaded the 7-day free trial and
did a quick fictitious link between my house in Erie, PA, and the WBEN AM radio station
in Buffalo, NY. My route is mostly over Lake Erie, so there was not much in the way of
obstructions, other than the curvature of the earth ...
 Anatech Electronics, a manufacturer of RF and microwave
filters, has published its December newsletter. In it, Sam Benzacar writes his annual
"RF and Microwave: The
Year in Review." He addresses the emerging technologies that are actually making
5G a reality in spite of the seemingly insurmountable obstacles presented by the realities
of physics. We've been there before with other newfangled technologies; i.e., Bluetooth.
Sam has a very quotable line regarding the driverless vehicle craze, "And for laughs,
there's always driverless vehicles, a goal driven (it seems to me) by people ...
 Fairview Microwave, a supplier of on-demand microwave
and RF components, has launched a new series of
waveguide to coax adapters that cover a frequency range of 1.7 GHz
to 110 GHz in 22 waveguide bands. Typical applications include test benches, instrumentation,
high efficiency RF/Microwave transmission, MILCOM, SATCOM, radar and telecom. Fairview's
new line of waveguide to coax adapters consists of 77 models in sizes of WR-10 to WR-430.
These adapters are offered in a wide selection of waveguide flanges, sizes and materials.
They support 10 ...
 Impedance matching of high-frequency components
is a key part of
antenna design that ensures maximum transfer of power between the
antenna and the transmitter / receiver circuitry. Antennas can be tuned to resonate at
the desired frequencies much more quickly and efficiently by first designing a matching
circuit rather than by making modifications to the antenna's physical dimensions. A new
application example describes a unique design flow using NI AWR Design Environment Microwave ...
 Modelithics
is pleased to share the news and congratulate
Dr.
Thomas Weller, the company's co-founder, on being named IEEE Fellow by the Institute
of Electrical and Electronics Engineers. This high designation is given by the IEEE Board
of Directors to persons having a history of significant accomplishments in the fields
of electrical engineering. Dr. Weller has been recognized for his extensive contributions
in the area of advanced RF and microwave modeling techniques for surface ...
 NASA's Jet Propulsion Laboratory issued the following
notice from their NASA Spinoff Database:
Power Amplifiers Boost Radar, Communications, Defense Systems. As a subcontractor
under an SBIR contract from the Jet Propulsion Laboratory,
QuinStar Technology
Inc. of Torrance, California, developed a solid-state power amplifier of unprecedented
efficiency. While most comparable devices lose 20% of their amplified energy when their
signals recombine, QuinStar's lose 8%. The solid-state technology ...
 The agenda has been finalized and registration
opened for the combined 2017
AWR
Design Forum (ADF) Germany and German User Group meeting, taking place in Munich
on December 12. ADF brings the latest NI AWR software solutions to customers, partners
and engineering professionals throughout the world, enabling them to learn, network and
collaborate on today's microwave/RF design challenges. Select presentation highlights
include: Complete X-Band 2x2 Phased-Array Antenna Design and Simulation, Including Low-Temperature ...
|
