ConductRF Flexible RF Cables to Replace Semi-Rigid or Hand Formable

Press Releases on RF Cafe

Press Release Archives:

2024 | 2023 | 2022 | 2021 |2020

2019 | 2018 | 2017 | 2016 | 2015

2014 | 2013 | 2012 | 2011 | 2010

2009 | 2008 | 2007 | 2006 | 2005

Content is copyright of company represented. Page format, custom text and images are RF Cafe copyright - do not distribute.

Flexible RF Cables

Alternative to Semi-Rigid Cable

• DC to 18 GHz Solutions

• Low Loss & Low VSWR

• Multi-Layer 90 dB Screening

• Laminated PTFE Dielectric

• Operating Temp up to 125 ºC

• Meets requirements of MIL-C-17

• Broad Connector Choices

Download Datasheet HERE

ConductRF Offers Flexible RF Cables, DC to 18 GHz - RF Cafe

ConductRF's LSA cables provide one of the most optimum and cost effective solutions for applications as diverse as alternatives to Semi-Rigid cabling, where complex forming is required, to easy to install Jumper Cables inside densely packaged RF enclosures where EMI is of concern.

ConductRF's LSA cables - RF Cafe


Performance Swept R/A Cables - Using our Low Profile SMA and Type-N "Swept Cable" configurations, ConductRF can provide R/A Assemblies with no VSWR performance loss when compared with equivalent straight connector solutions.  It is common to produce R/A Assemblies with VSWR of 1.20:1 and under through 18 GHz.

ConductRF's Broad Connector Choice - RF Cafe

Broad Connector Choice

LSA Cables are available on short lead-times in custom length and orientations using SMA, Type-N, MCX, SMP, BNC, TNC and many more standard connector ranges. All finished cable assemblies are 100% validated through VNA testing prior to delivery to factory or customer defined performance standards.

High Performance Multi-Layer Shielded Cable

ConductRF provides two standard cable size options using our own cable; A28RFJ(ø 0.086") & A29RFJ (ø 0.141"). These cables are built to with Multi-layer shielding consisting of a silver plated spiraled tape layer over which is a tin plated copper braid. Oxygen Free High Conductivity copper is used for Conductor and braid layers to maximize performance. Along with a Low Loss laminated PTFE dielectric and an FEP Jacket, assemblies built with these cable can operate with high stable performance in temperatures up to 125ºC.

ConductRF's High Performance Multi-Layer Shielded Cable - RF Cafe

Easy Part Number Build

1.  Using our two common cable types, let us know if you want an LSA28 (ø 0.086") or LSA29(ø 0.141") cable.

2.  Then describe your preferred connector range selection and configuration.

3.  Finally describe the length in the units of your choice.

ConductRF LSA29 Easy Part Number Build - RF Cafe

Find Much More at www.ConductRF.com ConductRF offers two complete range of RF Connectors for Commercial & Mil/Aero applications.  With a wide array of cable assembly selections using ConductRF can help narrow down your needs to the perfect solution for System of Test. Go to www.ConductRF.com and see our full range of capabilities.  Alternatively email us with your requirements and we will get back to you within 24 hours with your solution.

Note: LMR is a Times Microwave System Trade Mark.  ConductRF exclusively uses Times Microwave LMR products in the manufacturing of this series of cables.

LEARN MORE

ConductRF offers many more RF solutions from applications up to 110 GHz.

ConductRF offers Straight & R/A Low PIM Connectors for 7/16, N, SMA, QMA, 4.1/9.5 and 4.3/10 interfaces. PIM levels vary depending on cable and configuration. We also offer Adapters. Download our datasheets by clicking the pictures above for more detail of call us at +1 978 374 6840.

Contact Info

ConductRF-EAM

126 Merrimack Street

Methuen MA, 01844 - US

Telephone: +1 978 374 6840

About Conduct RF

ConductRF is the brand name for Electronic Assembly Mfg. Inc's complete RF interconnect product line including cable assemblies. Operating out of Methuen, Massachusetts, EAM has been in the RF Interconnect industry for nearly 20 years, successfully supporting high performance solutions that require precision and expertise to bring to life. Our ConductRF brand builds on this expertise with an expanded product offering, including both commercial and precision RF coaxial connector ranges as well as the capability to support customized solutions with our Application Engineering focus. We can provide diverse manufacturing solutions with our capabilities in the U.S. as well as Asia from where support low cost volume coax production requirements.

 

 

Posted July 31, 2017